Blog

Why RF SOI?

RF SOI is a specialized process used to make select RF chips, such as switch devices and antenna tuners, for smartphones and other products. RF SOI is the RF version of silicon-on-insulator (SOI) technology, which is different than fully-depleted SOI (FD-SOI) for digital chips.May 17, 2018

Why RF SOI?

INCREASING COMPLEXITY. Each generation requires more devices and higher performance in the front-end module. Because RF-SOI can bring better linearity and insertion loss at the best cost/performance trade-off, it enables higher data speeds, longer battery life and fewer dropped calls.

What is 8SW?

8SW is the industry's first fully. qualified high-volume RF SOI. foundry solution manufactured. on 300 mm wafers. The top three 5G sub-6 GHz.

What is SOI technology?

In semiconductor manufacturing, silicon on insulator (SOI) technology is fabrication of silicon semiconductor devices in a layered silicon–insulator–silicon substrate, to reduce parasitic capacitance within the device, thereby improving performance.

What is fully depleted SOI?

Fully Depleted Silicon on Insulator, or FDSOI, is a planar process technology that delivers the benefits of reduced silicon geometries while simplifying the manufacturing process. ... Then, a very thin silicon film is used to form a transistor channel.Jul 20, 2018

image-Why RF SOI?
image-Why RF SOI?
Related

What is RF in FD?

At the most simplistic level – RF: radio frequency – is part of the analog family, and as such is all about waves.Oct 28, 2015

Related

What is BiCMOS fabrication?

The BiCMOS fabrication combines the process of fabrication of BJT and CMOS, but merely variation is a realization of the base. The following steps show the BiCMOS fabrication process.

Related

What are the advantages of SOI technology?

From a physical standpoint, the difference between these two configurations is that in the nonfully depleted device the SOI film is doped in such a way that in operation a neutral region exists between the front and back gate depletion regions, thus eliminating coupling between the two parallel MOS devices making up ...

Related

How does SOI technology improve the performance of a circuit?

Silicon-on-insulator (SOI) technology has emerged in recent years as a way to improve the performance of semiconductor devices. ... In short, the SOI structure leads to a reduced parasitic capacitance and other nonideal effects, such that the performance is drastically improved relative to conventional, non-SOI approaches.

Related

What is FD-SOI technology?

Fully depleted silicon on insulator (FD-SOI) technology is a planar process that leverages existing manufacturing methods to deliver reduced silicon geometries, improved performance and low power. This extends Moore's Law without the need for significantly more complicated manufacturing processes.

Related

What is the difference between fdsoi and FinFET?

How big of a difference is it? Low: 14nm FinFETs were created for more performance, lower power and more scaling. There is no doubt that 14nm finFETs will allow you to have a higher performance point compared to 28nm FD-SOI. In terms of power, finFET also provides the benefit of low power.May 13, 2015

Related

What is bulk CMOS?

Bulk CMOS is a chip built on a standard silicon wafer. Fabrication steps of Bulk CMOS. The fabrication of Bulk CMOS has following steps: Create an n-well region and channel stop regions. Grow field oxide and Gate oxide.Dec 14, 2018

Related

Is bipolar and BiCMOS are same?

BiCMOS combines both Bipolar and CMOS technologies in single IC. ... Bipolar has merits over CMOS in areas of faster switching speed and large current cababilities. BiCMOS utilizes benefits of both Bipolar and CMOS technologies. Refer BiCMOS basics and devices➤.

Related

What are benefits of BiCMOS?

It follows that BiCMOS technology offers the advantages of: 1) improved speed over CMOS, 2) lower power dissipation than Bipolar (simplifying packaging and board requirements), 3) flexible I/Os (TTL, CMOS, or ECL), 4) high performance analog, and 5) latchup immunity [1.2].

Related

Why BiCMOS is faster than CMOS?

On the negative side is the high static power consumption and the small packing density of ECL in comparison to CMOS. ... Although the unloaded delay of this circuit is larger than that of the plain CMOS inverter the BiCMOS circuit is much faster for large fan-out due to its small sensitivity to capacitive loading.

Related

What is RF-SOI technology?

  • ST’s RF-SOI technology is a specialized process, optimized to perfectly meet the demanding analog RF performance and integration requirements of RF Front-End Modules for 4G, 5G, 2.4-5 GHz RF connectivity and Narrowband IoT devices, also known as LTE Cat NB1.

Related

What are the advantages of the rfsoi?

  • RFSOI technologies are built on high resistivity trap rich SOI material which provides the benefit of low harmonics, capability of stacking devices to achieve high voltage switches while maintaining low Ron*Coff and good isolation.

Related

Why choose rfsoi from UMC?

  • UMC’s RFSOI portfolio has been successfully adopted by multiple customers in the market. UMC’s RFSOI technology is available in 200mm as well as 300mm fabs. Complete EDA tools and design support.

Related

What is the capacity of RF SOI substrates?

  • • Soitec and others sell RF SOI substrates to foundries, which process them into RF chips. Foundry vendors have 200mm RF SOI capacity, but they still can’t keep pace with demand. • Several foundries are ramping up 300mm RF SOI, but capacity is limited.

Share this Post: